Recently a Machining Center Spindle was received by Motor City Spindle Repair, in non-working order. The Spindle Shaft was bent in the rear section, had damage in the CAT 40 I.D. Taper, and front face. Considering the type of damage this spindle had, we believe the spindle failed due to it crashing while in production. Once cleaned, the Shaft was sent out for Chrome and Grind work for extensive requalification of the Shaft, to get it back to the factory specifications. New Seals and O-rings were ordered, to replace worn ones in the spindle. One of our Experience Spindle Technicians(with an average of 20 years experience) Rebuilt the UF40RC Spindle. New Precision Steel Roller bearings and Cup & Cone Bearings were replaced during the reassembly of the spindle. The Spindle was then test run for approximately four(4) hours on one of our test stands. Our Technicians precisely balanced the Euroma Spindle, so the spindle produced little to no vibrations, while running at the maximum RPM.
Give us a call at (734) 261-8600 to find out why Motor City Spindle Repair is one of the fastest growing cnc spindle repair companies in the USA. Check us out at www.motorcityrepair.com